Base Station Plate Antenna Home > Base Station Plate Antenna

TD-FA / D Electrical Plate Type Antenna

Available with TD-SCDMA LTE
Quality is safe and reliable
Fine appearance
Excellent indicator
Easy to install
INQUIRY
1.Electrical Specifications
TD-FA/D index

 
Index Element Beam Pattern/single antenna element Beam is steered towards 0° Beam is steered towards 60° Broadcast Beam Pattern is steered towards 65°
Frequency rangeMHZ) 1880-1920/2010-2025/2555-2655
GaindBi 13.5/14.5/15.5 19.5/20.5/21 17/17/17 13.5/14.5/15.5
Beam width(Horizontal) ° 100/90/65±15 ≤29 ≤32 65±5
Electrical downtilt° 2-12/2-12manual regulation
Polarization ±45°
(Element Beam Pattern) VSWR(voltage standing-wave ratio) 1.5
Cross-polar ratio ≥15
Cross-polar ratio60° ≥10
Sidelobe suppression for first sidelobe above element beam patterndB) ≤-16
Element beam pattern beam width(Vertical)° 7/6/5
Element beam pattern front-to-back ratiodB) ≥23
Broadcast beam pattern front-to-back ratiodB) ≥28
Traffic Beam Pattern front-to-back ratio ≥28
Same polarization isolationdB) ≥202°-4°,≥255°-12°
Polarized isolationdB) ≥242°-4°,≥285°-12°
Degree of coupling from calibration port to each unit portdB -26±2
amplitude maximum deviation from calibration port to each unit portdB ≤0.7
Phase maximum deviation from calibration port to each unit port ≤5
Input impedanceΩ 50
Input powerW) 50
Connector 2*2*TD
           
 
 
2.Mechanical Specifications

 
Antenna size 1360*320*140mm Pole diameter Φ80-Φ114mm
Packing size 1650*385*230mm Mechanical tilt 0-10°
Antenna weight 17.5kg Lightning protection DC Ground
Gross weight 25.2kg Working Temperature -40 to +60
Radome material FRP(glass fiber reinforced plastics) Rated Wind Velocity 110km/h
 
 
3. Accessories Description

 
Conventional accessories Install one set of clip code
Matching accessories RCU handheld controller(scan and control the operation of RCU driver)
0.5 meter of control cable(connect with tadem of two RCU driver )
30 meter of control cable(connect with RCU driver and RCU handheld controller, the length can be customized)
3meter of bunched cable(turn the 4core,5core of bunched connecter to 9pcs of N-connector, the length can be customized )
RCU driver(connect with antenna adjustment knob, control the adjustment of dividing rule )